hot products
electric worm gear screw jacks
Motorized Electric Screw Jack Actuators Price

Electric screw jack actuators  is a basis jack-up part, accomplish the functions such as lifting, drop, push and inverting through worm gear drives screw.

electric worm gear screw jack lift
Two-set Linkage Screw Jack System

Two-set linkage screw jack system can be "L", I and T configuration.  It usually consists bevel gearbox, screw jack, electric motor, gear reducer, hand wheel, pillow block bearing, jaw coupling, line shafting.

 Automatic Screw Jack Lift System
Good Performance Screw Jack Lift System

Screw jack lift system structures include miter gearboxes, screw jacks, electric motor or gear reducer, hand wheel, pillow block bearings, jaw couplings and line shaftings.  Screw Jack System Features: 1. Heavy duty, self-locking, positioning precision, uniform lifting speed, fully synchronization, easy installation, easy operation 2. Two screw jacks system, three screw jacks system..forty screw jacks system. 3. Extremely high capacity requirements of need very precise up or down control. It's of high mechanical, they are an excellent choice when hydraulic, pneumatic or chain systems are prohibitive choices. 4. Widely used in wood working machines, plastics processing machines, textile machines, assembly equipment in the automobile and aircraft industries, food and beverage production equipment as well as packaging machines.

acme ball screw jacks screw lift
Four-set Linkage Screw Jacks System

Four-set linkage screw jack system can be  I and T configuration, transmission efficiency can be 85% .

worm screw jack lift table
High Efficiency Worm Gear Screw Jack Systems

Screw jack lift system structures include miter gearboxes, screw jacks, electric motor or gear reducer, hand wheel, pillow block bearings, jaw couplings and line shaftings.

SE enclosed housing slewing drive
Slewing Drive for Aerial platform

Slewing drives are powered with hourglass worm technology for maximum gear torque and the smoothest rotation.

Worm Gear Slewing Drive
Slewing Drive WE Series

WE Series Slewing drive is combined by the curved tooth slewing ring and worm, gear and worms are more touch supply larger torque.

spiral bevel gear unit
HD Series Spiral Bevel Gearbox

HD Series spiral bevel gearbox is hexahedron,which can fit different direction mounting.

worm gear ball and acme screw jacks
Worm Gear Screw Jack with reducer and motor

Screw jack is used in applications where linear motion is required. Lifting of any load, pushing or pulling of mechanical equipment, adjusting of tight clearances of mechanical parts can be done by screw jacks.

Spiral Gear screw jack
High-speed Lifting Bevel Gear Screw Jack

High-speed lifting bevel gear screw jacks are partly completed machines and intended for installation in complete machines or to be used for assembly with a totality of machinery to create systems.The bevel gear transmission makes high lifting speeds and a high duty cycle possible.

acme mechanical screw jacks lifts
Trapezoidal Machine Screw Jacks 5Ton

Worm Gear Machine Screws Jacks are common worm gear screw jacks,can be upright or inverted,with anti-rotation or self-locking functions.

high efficiency electric lift cylinder
Energy Saving Electric Linear Actuator with DC Motor

An Electric Linear Actuator is an actuator that creates motion in a straight line, in contrast to the circular motion of a conventional electric motor.

right angle bevel gearboxes
T Series Bevel Spiral Gearbox

T series bevel gearbox is standardized with many varieties. The deceleration ratio is 1:1, 1.5:1, 2:1, 2.5:1 and 3:1, which are all actual transmission ratios.

Acme Screw Linear Actuator
ACME Screw Linear Actuator with AC Motor

A Electric Linear Actuator is a mechanical device that converts energy (power from air, electricity or liquid) to create motion in a straight line.

ball screw electric cylinder
Ball screw lifting electric linear actuator

An electric linear actuator is a device that converts the rotational motion of a motor into linear motion – that is push and pull movements.

News
Manual Operated Screw Jack

2019-01-09

Manual operated screw jack is ideal solutions for applications where electricity or power generators is inconvenient or dangerous, light weight, low duty cycle, low target cost and short travel length .

 

As a kind of small screw jack, there’re also a variety of power supply choice.  Various motors can be configured and used . Some small tonnages can also be equipped with handwheels or cranks for manual operation,and also can choose electric, manual assembly at the same time, so that you can continue to use without power supply, which is very convenient .

 

Hand operated screw jack is composed of hand wheel or hand crank and a worm gear screw jack, which has intermittent precisely positioning and self-locking feature for no creeping down without brake mechanism or other locking systems. When manual ball screw jack, no self-locking feature, avoid ball screw back drive with attached load, which needs additional brake mechanism or other locking system to prevent it creep.

 

For manual operated screw jacks, we recommend choose a slower speed so that it will be less laborious to shake. It should be noted that the total efficiency of the slow screw jack is not as good as that of the ordinary speed ratio screw jack. Therefore, it is necessary to determine whether the screw jack is manual or electric according to the specific situation of use.

newsletter
contact us

Phone :

+86 15684332999

Add :

NO.2758 Mengyin Road, Ecomomic&Technical Development Zone, Dezhou, Shandong, China

Skype :

15684332999

Copyright © 2019 Dezhou Lude Transmission Equipments Co.,Ltd.All Rights Reserved.

Online Service
Contact Us