Products
  • Hand Crank Table Lift  Screw Jack Mechanism Hand Crank Table Lift Screw Jack Mechanism
    The Crank Handle Screw Jack are ideal solutions for applications where electricity or power generators is inconvenient or dangerous, light weight, low duty cycle, low target cost and short travel length. The working principle of the hand operated worm gear screw jack is that the worm (also called the input shaft) is manually rotated by the hand wheel, the worm wheel is rotated by the worm, and the trapezoidal lifting screw is moved by the rotating worm wheel. The linear motion speed of the worm wheel manual screw jack trapezoidal lifting screw depends on the thread size and the worm gear speed ratio. Hand Operated Screw Jack is composed of hand wheel or hand crank and a worm gear screw jack.It is ideal solutions for applications where electricity or power generators is inconvenient or dangerous.
    read more
  •  stainless steel screw jack SWL 2.5T Stainless Steel Worm Gear Screw jack
    Lude Transmission stainless steel screw jacks are specifically designed for positioning and lifting applications that are located in wet, corrosive and harsh environments. They can be trapezoidal type or ball type. Metallurgical properties of stainless steel allow it to remain ductile even at very low temperatures.These mechanical jacks are available in 2 ton through 25 ton capacities. Upright or inverted jacks operate at full capacity in tension or compression. Features: All exposed surfaces and components feature stainless steel or bronze construction Nitrile rubber seals protect all internal mechanisms. Tapered or ball thrust bearings provide rugged reliability Choose one of four standard end conditions Protective boots available Anti-backlash devices available
    read more
  • Stainless Steel Screw Jack Hand Operated Worm Gear Stainless Steel Screw Jack
    Lude Transmission stainless steel screw jacks are specifically designed for positioning and lifting applications that are located in wet, corrosive and harsh environments. They can be trapezoidal type or ball type. Metallurgical properties of stainless steel allow it to remain ductile even at very low temperatures.These mechanical jacks are available in 2 ton through 25 ton capacities. Upright or inverted jacks operate at full capacity in tension or compression. Features: All exposed surfaces and components feature stainless steel or bronze construction Nitrile rubber seals protect all internal mechanisms. Tapered or ball thrust bearings provide rugged reliability Choose one of four standard end conditions Protective boots available Anti-backlash devices available
    read more
  • Linear Actuator Electric with AC Motor Linear Actuator Electric with AC Motor
    A linear actuator is a mechanical device that converts energy (power from air, electricity or liquid) to create motion in a straight line; contrasted with circular motion of a conventional electric motor. It can also be used to apply a force. Types of motion include: blocking, clamping, ejecting, lifting, descending, pushing or pulling. Features Trapezoidal thread The motor is connected to the threaded spindle via a worm gear. Depending on the model, fixing via the joint head and rotary bearing console or rod end bearing and eye gear flange Solenoid switch and rotary encoder available Trap nut safety system for trapezoidal screw threads available ACME Screw Linear Actuator Main Datas Load capacity:max 2.5ton     Max.lifting speed:93mm/s  Motor power:380/220VAC
    read more
  •  Stainless Steel Housing Worm Gear Jack JWM Series Stainless Steel Housing Worm Gear Jack
    Lude Transmission stainless steel screw jacks are specifically designed for positioning and lifting applications tha are located in wet, corrosive and harsh environments. They can be trapezoidal type or ball type. Metallurgical properties of stainless steel allow it to remain ductile even at very low temperatures.These mechanical jacks are available in 2 ton through 25 ton capacities. Upright or inverted jacks operate at full capacity in tension or compression Features:All exposed surfaces and components feature stainless steel or bronze constructiorNitrile rubber seals protect all internal mechanismsTapered or ball thrust bearings provide rugged reliabilityChoose one of four standard end conditionsProtective boots availableAnti-backlash devices availableLude Transmission can customize to your specifications
    read more
  • ball screw jack JWB Series Ball Screw Worm Gear Screw Jack
    Rotating Ball Screw Jacks use a ball screw and nut made from hardened alloy steel with bearing balls carrying the load between nut & screw. They can be employed for lifting, pulling, moving, aligning any kind of load with a perfect synchronism, which is difficult to obtain by means of other handling devices. The ball worm screw jacks are suitable for high services as well as for a very rapid, quick and precise positioning. They can be driven by different motors: electrical, with either alternating or direct current, as well as hydraulic or pneumatic motors. Also they can be driven manually or with any other kinds of transmission. LUDE Transmission ball screw jacks are designed and manufactured using innovative technology so to supply a product which identifies itself with the state of the art in the transmission devices.

    Hot Tags :

    ball screw jack
    read more
  • heavy duty linear electric actuator Heavy Duty 12V DC Motor Linear Electric Actuator
    Heavy duty electric linear actuator is a kind of electric actuator that can withstand a large load.
    read more
  • Machine Screw Jack Custom 5 Ton Machine Screw Jack Lift
    read more
  • small screw jack Small Lead Mechanical Screw jack 5KN
    5 KN  Small Screw Jacks, also called 5 kN Cubic worm gear screw jack or small worm screw jack.
    read more
  • Worm Gear Screw jack SWL Series Worm Gear Screw jack
    1.Performance Table  2.Main features for acme screw jack SWL screw jack is suitable for low speed and low frequency. Main components:Precision trapezoid screw pair and high precision worm-gear pair. 1.Economical: Compact design,easy operation,convenient maintenance. 2.Low speed and low frequency Be suitable for heavy load,low speed,low service frequency. 3.Self-lock Trapezoidal screw has self-lock function,it can hold up load without braking device when screw stops traveling. 4. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 5. Top End: top plate, clevis end, threaded end, plain end
    read more
  • ball screw jack SJB Model Ball Screw Jack with Top Plate End
    The ball screw jacks can be employed for lifting, pulling, moving, aligning any kind of load with a perfect synchronism, which is difficult to obtain by means of other handling devices. The ball screw jacks are suitable for high services as well as for a very rapid, quick and precise positioning. Ball Screw Jacks use a ball screw and nut made from hardened alloy steel with bearing balls carrying the load between nut & screw. This rolling action reduces the friction between nut and screw, permitting smooth and efficient load movement that requires approximately 1/3 less torque than a machine screw jack with the same load. Ball screw jacks are preferred for:  Long travel lengths . Long, predictable life .  High duty cycles.  Oscillating motion

    Hot Tags :

    SJB screw jack
    read more
  • Hand Operated Screw Jack for Crank Table Hand Operated Screw Jack for Crank Table
    The working principle of the hand operated  worm gear screw jack is that the worm (also called the input shaft) is manually rotated by the hand wheel, the worm wheel is rotated by the worm, and the trapezoidal lifting screw is moved by the rotating worm wheel. The linear motion speed of the  worm wheel manual screw jack trapezoidal lifting screw depends on the thread size and the worm gear speed ratio. Hand Operated Screw Jack is composed of hand wheel or hand crank and a worm gear screw jack.It is ideal solutions for applications where electricity or power generators is inconvenient or dangerous. Our Jack's Advantages: -Self-locking ability -Can be driven directly by hand wheel -Can be customized according user's demand -Compact configuration, small size, lightweight -Convenient installation, flexible operation -High reliability and stability -2 / 3 /4 /8 sets etc. screw jacks to linkage to use  Please see a short video about hand operated screw jack for crank table below,
    read more
newsletter
contact us

Phone :

+86 15684332999

Add :

NO.2758 Mengyin Road, Ecomomic&Technical Development Zone, Dezhou, Shandong, China

Skype :

15684332999

Copyright © 2019 Dezhou Lude Transmission Equipments Co.,Ltd.All Rights Reserved.

Online Service
Contact Us