hot products
electric worm gear screw jacks
Motorized Electric Screw Jack Actuators Price

Electric screw jack actuators  is a basis jack-up part, accomplish the functions such as lifting, drop, push and inverting through worm gear drives screw.

electric worm gear screw jack lift
Two-set Linkage Screw Jack System

Two-set linkage screw jack system can be "L", I and T configuration.  It usually consists bevel gearbox, screw jack, electric motor, gear reducer, hand wheel, pillow block bearing, jaw coupling, line shafting.

 Automatic Screw Jack Lift System
Good Performance Screw Jack Lift System

Screw jack lift system structures include miter gearboxes, screw jacks, electric motor or gear reducer, hand wheel, pillow block bearings, jaw couplings and line shaftings.  Screw Jack System Features: 1. Heavy duty, self-locking, positioning precision, uniform lifting speed, fully synchronization, easy installation, easy operation 2. Two screw jacks system, three screw jacks system..forty screw jacks system. 3. Extremely high capacity requirements of need very precise up or down control. It's of high mechanical, they are an excellent choice when hydraulic, pneumatic or chain systems are prohibitive choices. 4. Widely used in wood working machines, plastics processing machines, textile machines, assembly equipment in the automobile and aircraft industries, food and beverage production equipment as well as packaging machines.

acme ball screw jacks screw lift
Four-set Linkage Screw Jacks System

Four-set linkage screw jack system can be  I and T configuration, transmission efficiency can be 85% .

worm screw jack lift table
High Efficiency Worm Gear Screw Jack Systems

Screw jack lift system structures include miter gearboxes, screw jacks, electric motor or gear reducer, hand wheel, pillow block bearings, jaw couplings and line shaftings.

SE enclosed housing slewing drive
Slewing Drive for Aerial platform

Slewing drives are powered with hourglass worm technology for maximum gear torque and the smoothest rotation.

Worm Gear Slewing Drive
Slewing Drive WE Series

WE Series Slewing drive is combined by the curved tooth slewing ring and worm, gear and worms are more touch supply larger torque.

spiral bevel gear unit
HD Series Spiral Bevel Gearbox

HD Series spiral bevel gearbox is hexahedron,which can fit different direction mounting.

worm gear ball and acme screw jacks
Worm Gear Screw Jack with reducer and motor

Screw jack is used in applications where linear motion is required. Lifting of any load, pushing or pulling of mechanical equipment, adjusting of tight clearances of mechanical parts can be done by screw jacks.

Spiral Gear screw jack
High-speed Lifting Bevel Gear Screw Jack

High-speed lifting bevel gear screw jacks are partly completed machines and intended for installation in complete machines or to be used for assembly with a totality of machinery to create systems.The bevel gear transmission makes high lifting speeds and a high duty cycle possible.

acme mechanical screw jacks lifts
Trapezoidal Machine Screw Jacks 5Ton

Worm Gear Machine Screws Jacks are common worm gear screw jacks,can be upright or inverted,with anti-rotation or self-locking functions.

high efficiency electric lift cylinder
Energy Saving Electric Linear Actuator with DC Motor

An Electric Linear Actuator is an actuator that creates motion in a straight line, in contrast to the circular motion of a conventional electric motor.

right angle bevel gearboxes
T Series Bevel Spiral Gearbox

T series bevel gearbox is standardized with many varieties. The deceleration ratio is 1:1, 1.5:1, 2:1, 2.5:1 and 3:1, which are all actual transmission ratios.

Acme Screw Linear Actuator
ACME Screw Linear Actuator with AC Motor

A Electric Linear Actuator is a mechanical device that converts energy (power from air, electricity or liquid) to create motion in a straight line.

ball screw electric cylinder
Ball screw lifting electric linear actuator

An electric linear actuator is a device that converts the rotational motion of a motor into linear motion – that is push and pull movements.

Mini Bevel Gear Screw Jacks 1.7 Ton to 10 Ton
Bevel gear screw jack's load capacity is 1.7 Ton to 10 Ton. Compared with worm and worm wheel screw jacks, it has the features of high efficiency, long life, easy to adjust the reduction ratio.
Inquiry now
  • Product Details
  • Photo

 Lude Transmission Bevel Gear Screw Jacks, available in 7.5-ton to 100-ton static capacities, offer higher efficiency and greater speed than other mechanical screw jacks. As an added benefit, bevel gear jacks also act as miter boxes, making them an ideal choice for multi-jack systems. 

As many as three output shafts may be specified for mounting motors, limit switches, readout devices and other accessories. Bevel gear jacks with single lead screws (S series) provide the benefits of a self-locking screw, and bevel gear jacks with double lead screws (D series) offer even greater travel speed.

bevel gear screw jack

Specifications
  • Capacities from 15 kN to 90 kN
  • (1.7 Ton to 10 Ton)
  • Speeds up to 3,000 RPM
  • Operating Temperature: 32°F up to 122°F
  • Trapezoidal Screw models are standard
  • Translating screw (type 1) and rotating screw (type 2) model
  • available in all capacities
Options
  • Top plate, threaded end, male clevis and female clevis screw ends available.
  • Ball Screw is optional.
  • Bellows  Boots.
  • Hand wheel for manual operation.
  • Shaft  encoder.
  • Trunnion  mount.
  • Electrical Limit Switch.
  • Anti-rotation device (translating screw) using a square cover pipe and square screw end



Quick inquiry

have a question? you can call us or Email us by sending a message below.

We will contact you as soon as possible
Recently Viewed Products
Spiral Gear screw jack
High-speed Lifting Bevel Gear Screw Jack

High-speed lifting bevel gear screw jacks are partly completed machines and intended for installation in complete machines or to be used for assembly with a totality of machinery to create systems.The bevel gear transmission makes high lifting speeds and a high duty cycle possible.

Spiral Gear screw jack
Bevel Gear Screw Jack 1Ton

High-speed lifting bevel gear screw jacks are suitable for high frequency,high efficiency, and high speed.

bevel gear screw jack
High lifting speed bevel gear screw jack for lifting system

High-speed lifting bevel gear screw jacks are partly completed machines and intended for installation in complete machines or to be used for assembly with a totality of machinery to create systems. It is simple and effective solution in comparison with hydraulic and pneumatic systems.

Bevel Gears Screw Jack
Bevel Gears Screw Jack of High Performance

High-speed lifting bevel gear screw jacks are partly completed machines and intended for installation in complete machines or to be used for assembly with a totality of machinery to create systems. It is simple and effective solution in comparison with hydraulic and pneumatic systems.The use of a spiral-toothed bevel gear results in a high efficiency and a long lifespan.   Our Jack's Specifications: Capacities from 15 kN to 90 kN (1.7 Ton to 10 Ton) Speeds up to 3,000 RPM Operating Temperature: 32°F up to 122°F Trapezoidal Screw models are standard Translating screw (type 1) and rotating screw (type 2) model available in all capacities

mini screw jack
Mini Screw Jack with Rubber Protective Cover

Mini Screw Jack available load capacity is from 500kg to 100ton.

high efficiency electric lift cylinder
Heavy Duty Electric Ball Linear Actuator

Heavy duty electric linear actuator is a kind of electric actuator that can withstand a large load

 slew drive with 12V dc motor
WE Single Worm Slewing Drive

WE Series Slewing drive is combined by the curved tooth slewing ring and worm shaft and the housing.The compact contact between the Slewing Ring gear and worms can supply supply larger torque.

Worm Gear Screw jack
SWL Series Worm Gear Screw jack

1.Performance Table  2.Main features for acme screw jack SWL screw jack is suitable for low speed and low frequency. Main components:Precision trapezoid screw pair and high precision worm-gear pair. 1.Economical: Compact design,easy operation,convenient maintenance. 2.Low speed and low frequency Be suitable for heavy load,low speed,low service frequency. 3.Self-lock Trapezoidal screw has self-lock function,it can hold up load without braking device when screw stops traveling. 4. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 5. Top End: top plate, clevis end, threaded end, plain end

Acme Screw Linear Actuator
ACME Screw Linear Actuator with AC Motor

A Electric Linear Actuator is a mechanical device that converts energy (power from air, electricity or liquid) to create motion in a straight line.

manual acme screw jack
Hand Crank Screw Jack for Lifting Tables

Lifting table is an common appliance of Hand Crank Screw Jack . We offer 1ton,  2.5ton  and 5ton screw jack mechanism.

hourglass slewing drive and small slew drive for sale
Supply Hourglass Worm Gear Slewing Drive Small Slew Drive

Slewing drives,designed in integrated structure,compose of housing,slewing bearing,motor and worm.

Gear Screw Jack for Crank Table
Two- Set Worm Gear Screw Jack for Crank Table Lifting

The Worm Gear Screw Jack are ideal solutions for applications where electricity or power generators is inconvenient or dangerous, light weight, low duty cycle, low target cost and short travel length. 

newsletter
contact us

Phone :

+86 15684332999

Add :

NO.2758 Mengyin Road, Ecomomic&Technical Development Zone, Dezhou, Shandong, China

Skype :

15684332999

Copyright © 2019 Dezhou Lude Transmission Equipments Co.,Ltd.All Rights Reserved.

Online Service
Contact Us