According to detailed need, Ludetransmission can choose multiple screw jacks to make up a screw jack system.The system can be of different screw jack arrangements,like I/T/H/U type etc. When multiple ...
For translating screw jacks, key-way is a common way to realize the anti-rotation for the screw jack.In fact, there is another way,that is to use a special square tube. A square guide tube is attached...
1. The equipment cooling coil in the tank oil pool, the cooling water in the tube takes away some of the heat of the lubricating oil. 2. The worm gear and the worm gear are cooled by an electric fan. ...
The worm gear screw jack is a common linear transmission device. It uses a worm gear to drive the screw to lift, flip and so on , to complete a series of actions. It is extremely convenient to use.&nb...
During the operation of our reducer, there may be different faults. The cause of each problem is different. Then we often encounter the noise of the reducer. The components of the reducer have A lot, ...
The transmission ratio of a worm gear screw lift (often just called a worm gear) refers to the ratio between the number of turns the worm (the driving gear) makes for one complete revolution of the wo...
Screw stability verification: known load 100KN, stroke 500mm, speed 60mm/min, no guide rail, usage coefficient 1.5, low operating frequency, calculated model For (Heavy Duty Electric Linear Actuator m...
The gear ratio (also called the transmission ratio) of a worm gear screw jack refers to the ratio between the rotational speed of the worm and the rotational speed of the screw, usually expressed as t...
The gear ratio (also called the transmission ratio) of a worm gear screw jack refers to the ratio between the rotational speed of the worm and the rotational speed of the screw, usually expressed as t...
